Electric Suspended Heaters for High Ceilings & Hard-to-Heat Areas

A room with a high ceiling can be one of the hardest spaces in a building to heat evenly. Warm air rises, pools up near the roofline, and leaves everyone standing below just as cold as they were before the heat kicked on. It doesn’t matter whether that room is a warehouse bay, a gym, a lobby, or a single entryway with a tall, open ceiling. The taller the space, the harder a conventional furnace or space heater has to work to make any real difference at floor level. We built our line of electric suspended heaters to solve exactly this problem, by warming people and surfaces directly instead of trying to heat every cubic foot of air in between.

The ProblemThe Solution
Warm air rises out of reach in tall or open roomsRadiant panels heat people and surfaces directly, not the air between them
Forced-air systems take a long time to bring a room up to temperatureOur panels reach full heating potential in about 5 to 7 minutes
Standard heaters cannot be aimed at a specific cold spotPanels mount on a hard surface ceiling or wall at least 6 feet up, right where the heat is needed
Ductwork does not fit vestibules, entryways, or tight spot areasA slim panel mounts overhead or on a wall, with no ducts required

What Makes High Ceilings and Hard-to-Heat Spaces So Difficult to Warm?

The higher a ceiling, the more room warm air has to rise before it ever reaches the people below. In gyms, warehouses, sanctuaries, and other large open spaces, that means a furnace or forced-air system can run for a long time without making the floor level feel any warmer.

  • Warm air collects near the roofline instead of staying where people are
  • Large open volumes take longer to heat evenly with forced air
  • Drafts from doors, loading bays, or air handlers push warm air around unpredictably
  • Traditional systems often cannot reach ceilings 15, 20, or 30 feet up without wasting energy
  • Spot heaters and portable units help one small area but do nothing for the rest of the room

How Does an Electric Suspended Heater Work?

Electric suspended heaters mount on a hard surface ceiling or wall and radiate heat straight down onto people and surfaces, rather than warming the air first. Our hard surface ceiling mount and suspension panels use CeramiCircuit technology, pairing a highly emissive porcelain surface with a ceramic radiant heater circuit, and deliver 52 percent greater downward radiant output than competing units. Panels install at least 6 feet up from the floor, reach full heating potential in 5 to 7 minutes, and a carbon steel core keeps giving off heat for up to 10 minutes after the unit powers down. Models range from about 585 to 1,500 watts, so a room can be matched to the right size panel instead of over- or under-heating the space.

Where Are Suspended Heaters Used?

We see electric suspended heaters used anywhere a space has more height than a forced-air system can comfortably manage, or wherever a facility needs a spot of reliable warmth rather than an entirely new heating system.

  • Hot yoga and fitness studios, where instructors need to hold a room at 90 to 105 degrees or higher without cold spots
  • Entryways, vestibules, and lobbies with tall ceilings
  • Sporting venues, including concession stands, hallways, stairwells, and locker or training rooms
  • Warehouses, workshops, and other commercial spaces with pockets that are hard to heat

Because every building is different, we walk through the space with the facility owner or contractor first, looking at ceiling height, room size, and how the area is used before recommending a layout.

What Should I Look for When Choosing a Suspended Heater?

The right electric suspended heaters for a space depend on its size and how it is used, but a few things matter no matter the setting.

  • Mounting height and placement, since our panels need at least 6 feet of clearance from the floor
  • Wattage and coverage matched to the room, since panels come in a range of sizes
  • Build quality suited to commercial and industrial use, backed by a meaningful warranty (ours carries a 10-year limited warranty)
  • Whether the panel needs to work as a standalone spot heater or as part of the primary heat source for the room

Frequently Asked Questions

Does a suspended radiant heater work in rooms with very high ceilings?

Yes. Because suspended and hard surface ceiling mount panels heat people and surfaces directly instead of warming the air, they hold up well in gyms, vestibules, and other spaces with higher ceilings where forced air struggles to keep up. That includes rooms well beyond standard residential ceiling heights.

How high do the heaters need to be mounted?

Our hard surface ceiling mount and suspension panels are designed for installation at least 6 feet up from the floor, whether that is on a hard surface ceiling or a wall. That clearance keeps the panel safely out of the way while still aiming heat where it is needed.

How long does it take for the panels to warm up?

The panels reach full heating potential in about 5 to 7 minutes. A carbon steel core also keeps producing heat for up to 10 minutes after the unit powers down, so the room does not go cold the instant it shuts off.

Are these heaters only practical for large commercial buildings?

No. While warehouses, gyms, and sporting venues are common settings, the panels also work well as a spot heater for a single hard-to-heat room, entryway, or vestibule. Many owners start with one problem area and add panels elsewhere later.

If you are dealing with a hard-to-heat room, a tall ceiling, or a cold spot that never quite warms up, we are happy to talk through your space and figure out what fits. Contact Radiant Electric Heat at 800-774-4450, or reach our office at 22901 Aurora Rd, Bedford Heights, OH 44146.

Share:

Facebook
Twitter
Pinterest
LinkedIn

Related Articles