Healthcare Facilities
Electric Heating
Solutions for
Healthcare Facilities
Medical-grade radiant heat that prioritizes patient comfort, infection control, and energy efficiency.
Cleaner comfort
—with zero air movement—
is our specialty.
CeramiCircuit™ radiant panels warm patients and surfaces directly. No ducts, no blowers, no airborne pathogens.
Purpose-built for medicine
Healthcare demands more
from a heating system.
Patient safety, infection control, energy codes, and occupant comfort must all be satisfied simultaneously — often within the same wing, sometimes within the same room. Forced-air systems that circulate particulates through ductwork are increasingly incompatible with modern infection-control protocols.
That’s why hospitals, outpatient clinics, rehabilitation centers, and specialty medical facilities across the country are specifying CeramiCircuit™ radiant electric heating panels from ElectricHeat. Precise, zone-controlled warmth through infrared energy — warming people and surfaces directly, not the air.
Why radiant electric
Why radiant electric heat
is ideal for medical environments.
No Air Movement
CeramiCircuit™ panels emit long-wave infrared energy that heats occupants and surfaces directly. Pathogens stay settled — ideal for post-surgical, burn, NICU, and immunocompromised wards.
Zone-Specific Control
A trauma bay, waiting room, and sterile corridor can sit side by side. Panels can be zoned independently so clinical staff dial in precise temperatures for each micro-environment.
Silent Operation
No blower motors, no duct expansion, no compressor cycling. Radiant panels operate in complete silence — supporting patient sleep, recovery, and lower cortisol.
Hygienic Surfaces
Smooth, non-porous panels with no fins, grilles, or cavities. Cleaning follows standard hospital protocols — compatible with sterile and semi-sterile spaces.
Energy Efficient
Heat is delivered directly to occupants rather than the ambient air. Integrated with BAS and smart thermostats, panels heat only occupied spaces.
Clinical applications
From the burn unit
to the front door.
CeramiCircuit™ panels are specified across nearly every space type inside a modern healthcare facility. Nine of the most common are below.
Burn Units
Burn patients lose the ability to thermoregulate. Overhead or cove-mounted panels target each patient bay, are independently zoned and thermostatically controlled, avoid forced-air currents that could desiccate wounds, and are compatible with specialized infection-isolation ventilation.
Neonatal ICUs & Pediatrics
Stable ambient warmth with no cold spots near windows or supply diffusers. Silent, consistent comfort for the most sensitive patients.
Geriatric & Long-Term Care
Radiant heat warms the body directly — like natural sunlight — especially effective for residents who spend extended time seated or in bed.
Operating Rooms
Supplemental heat that brings patients to normothermic temperatures quickly, without disrupting laminar airflow or the sterile field.
PACU & Recovery
Immediate overhead warmth restores normothermia after anesthesia — no blanket heaters or hot-air warming devices required.
Clean Rooms & SPD
Radiant heat warms the body directly — like natural sunlight — especially effective for residents who spend extended time seated or in bed.
Reception & Vestibules
Overhead panels neutralize cold infiltration at entrances. Patients and families are comfortable the moment they step inside.
Corridors & Stairwells
Spot heating eliminates cold pockets without extensive ductwork runs or additional air handling equipment.
Covered Walkways
Radiant heat warms the body directly — like natural sunlight — especially effective for residents who spend extended time seated or in bed.
Compatible products
Every space in the facility, covered.
Four form factors let CeramiCircuit™ integrate cleanly with any healthcare ceiling or floor system — from a standard T-bar patient room to a poured-concrete procedure suite.
Lay-In Ceiling Panels
Drop directly into 2×2 or 2×4 T-bar grids — invisible in most healthcare ceilings. Ideal for patient rooms, offices, and waiting areas.
Cove Mount Panels
Installed at the wall–ceiling junction to direct radiant heat downward. Ideal where ceiling tiles aren't available or directional heat is preferred.
Hard Surface / Suspension
Surface-mount or suspend on exposed concrete, plaster, or drywall ceilings same radiant performance without T-bar.
Klima Underfloor
Gentle, even heat from below for procedure rooms, hydrotherapy areas, and specialty spaces where floor warmth enhances comfort.
Compliance & standards
UL listed.
Standard circuits.
Panels carry UL listing and are compatible with 120V, 208V, 240V, and 277V electrical systems. Our engineering team works directly with healthcare facility designers, mechanical engineers, and infection control officers to ensure specifications meet all applicable codes.
120V
Compatible
208V
Compatible
240V
Compatible
277V
Compatible
Sustainability
Green building goals, met.
100% Electric
Fully compatible with solar, wind, and green utility tariffs.
No Combustion
Eliminates on-site fossil fuel, reduces NOx and CO₂.
Energy Metering
Per-panel consumption for sustainability accounting.
LEED & WELL
Supports credits for IAQ, energy, and occupant comfort.
Compliance & standards
Questions from facility teams.
Yes, in many applications. For patient rooms, offices, waiting areas, and corridors, CeramiCircuit™ panels can serve as the primary heating system. In clinical spaces with high ventilation rates (like ORs or sterile processing), they are most effective as supplemental heat alongside the mechanical HVAC system.
No. Panels connect to standard 120V, 208V, 240V, or 277V circuits. Your electrical contractor installs them like any fixed electrical appliance. Our team provides load calculations and wiring specifications during design.
CeramiCircuit™ panels are compatible with 0-10V dimming controls, BACnet-compatible devices, and standard relay-based BAS integrations. We specify a controls package appropriate for your facility’s existing automation platform.
Minimal. Radiant electric panels have no moving parts and no filters. Routine maintenance is periodic surface cleaning with standard hospital disinfectants. Panels are designed for decades of reliable service.
Work with us
Bring cleaner comfort to your next healthcare project.
Our team supports design teams from small outpatient clinics to large academic medical centers — specification assistance, load calculations, zone-control design, MEP coordination, and full submittal documentation.
- Specification assistance for A/E and facility planners
- Load calculations to right-size panel arrays
- Zone-control design for your clinical workflow
- Coordination with your MEP engineers
- Project brochures and submittal packages
Request A Quote
Tell us about your facility. We’ll respond within one business day.